ScanSpeak 15W, 8530K00 MidWoofer - Revelator Range

Revelator mid-woofers are famous for their Scanspeak Sliced Paper Cones; the slices are filled with damping glue. The effect is to reduce break-up nodes in the 6" cone and give a midrange clarity and overall smooth frequency response, which has made this top audiophile range uniquely successful.

Low Loss linear suspension, large ferrite magnet system and high output. Symmetrical Drive Motor System, Low Damping SBR Rubber Surround.

Specification:

• Resonance frequency [fs] 30 Hz
• Mechanical Q factor [Qms] 4.90
• Electrical Q factor [Qes] 0.29
• Total Q factor [Qts] 0.27
• Force factor [Bl] 7 Tm
• Mechanical resistance [Rms] 0.50 kg/s
• Moving mass [Mms] 13 g
• Suspension compliance [Cms] 2.16 mm/N
• Effective diaph. diameter [D] 110 mm
• Effective piston area [Sd] 95 cm²
• Equivalent volume [Vas] 27.4 l
• Sensitivity (2.83V/1m) 85.5 dB
• Ratio Bl/√Re 2.91 N/√W
• Ratio fs/Qts 110 Hz

Electrical Data: 

• Nominal impedance [Zn] 8 Ω
• Minimum impedance [Zmin] 6.9 Ω
• Maximum impedance [Zo] 104 Ω
• DC resistance [Re] 5.8 Ω
• Voice coil inductance [Le] 0.35 mH

Power Handling:

• 100h RMS noise test (IEC 17.1) 60 W
• Long-term max power (IEC 17.3) - W

Voice Coil and Magnet Data:

• Voice coil diameter 38 mm
• Voice coil height 18 mm
• Voice coil layers 2
• Height of gap 5 mm
• Linear excursion ± 6.5 mm
• Max mech. excursion ± 9 mm
• Unit weight 1.7 kg

PRICE (1 off)
£150.70 +vat +p&p