Neotech NES-3001 & NC-01675RH Speaker Cable Assembley

How to build a speaker cable using Neotech's NES-3001: Neotech Multistrand Copper Speaker Cable with NC-01675RH: Neotech OFC Rhodium Plated Banana Plugs.

Parts List For 2 metre pair

• NES-3001: Neotech Multistrand Copper Speaker Cable (1m) x 4
• NC-01675RH: Neotech OFC Rhodium Plated Banana Plug (pack of 4) x 2
• 40118: Viablue Crimp Sleeve, 4.35mm dia. x 8
• HTSR9.5, Red heatshrink 2:1, 9.5mm diameter (1m) x 1
• HTSB9.5, Black heatshrink 2:1, 9.5mm diameter (1m) x 1
• HTSBL9.5, Blue heatshrink 2:1, 9.5mm diameter (1m) x 1
• HTSB19.1, Black heatshrink 2:1, 19.1mm diameter (1m) x 1

Cost at time of publication (Feb 2024) £999.83 +vat

Important Notes

A multimeter is required to identify the clear conductors

For single wiring (at both ends)

• positive connection, use 6 x red and 1 x clear conductors
• negative connection, use 6 x blue and 3 x clear conductors

If you want to bi-wire

• at amp end
  • positive connection, use 6 x red and 1 x clear conductors
  • negative connection, use 6 x blue and 3 x clear conductors
• at speaker end
  • positive connection, HF (high frequency), use 4 x red conductors
  • negative connection, HF, use 4 x blue conductors
  • positive connection, LF (low frequency), use 4 x red and 2 x clear conductors
  • negative connection, LF, use 4 x clear conductors

Tools Required

• Flat head long screwdriver, the fit must be tight tolerance
• cutters
• smooth jawed pliers
• scissors
• wire strippers
• hack-saw
• heat gun
• black electrical tape

Time taken - 30 mins for one length of cable