ScanSpeak D3004, 660000 Tweeter - Illuminator Range

Click to Zoom
ScanSpeak D3004, 660000 Tweeter - Illuminator Range

The Illuminator tweeters stand for superb vocal rendition and excellent imaging at all listening locations. Its large roll surround and textile dome diaphragm provides a flat frequency response to above 30KHz with outstanding off-axis dispersion. The unique AirCirc Magnet System, and its rear chamber, results in elimination of reflections and resonances that compromise the performance of traditional motors.

This tweeter features a 1" Textile dome, patented symetrical drive (SD-2) motor, Die cast rubber painted aluminium face plate, a large roll surround for wide and even distribution and AirCirc motor design with 6 Neo Magnets.

Specification:

  • Resonance frequency [fs] 470 Hz
  • Mechanical Q factor [Qms] 3.0
  • Electrical Q factor [Qes] 0.59
  • Total Q factor [Qts] 0.49
  • Force factor [Bl] 2.3 Tm
  • Mechanical resistance [Rms] 0.3 kg/s
  • Moving mass [Mms] 0.35 g
  • Suspension compliance [Cms] 0.33 mm/N
  • Effective diaph. diameter [D] 30 mm
  • Effective piston area [Sd] 7.0 cm²
  • Equivalent volume [Vas] 0.02 l
  • Sensitivity (2.83V/1m) 91.5 dB
  • Ratio Bl/√Re 1.33 N/√W
  • Ratio fs/Qts 959 Hz

Electrical Data:

  • Nominal impedance [Zn] 4 Ω
  • Minimum impedance [Zmin] 3.5 Ω
  • Maximum impedance [Zo] 18.4 Ω
  • DC resistance [Re] 3 Ω
  • Voice coil inductance [Le] 0.03 mH
  • Power Handling 100h RMS noise test (IEC 17.1)* 90 W
  • Long-term max power (IEC 17.3)* 150 W 

*Filter: 2. order HP Butterworth, 2.5kHz

Voice Coil and Magnet Data

  • Voice coil diameter 26 mm
  • Voice coil height 2.1 mm
  • Voice coil layers 2
  • Height of gap 2.5 mm
  • Linear excursion ± 0.2 mm
  • Max mech. excursion ± 1.6 mm
  • Unit weight 0.3 kg

PRICE (1 off)
£157.34 +vat +p&p

Subscribe to Hifi Collective