Elekit TU-H82 Hybrid Tube Amplifier Kit
Ideal for the constructor with zero soldering skills but interested in the amplifier kit's mechanics. No soldering is required to make the TU-H82. The versatile stereo amplifier will accept a signal from a pair of RCA phono sockets, a 3.5mm jack and has an inbuild DAC so it can be connected easily to your computer. The output is through speaker posts, and the kit offers your headphones a 3.5mm jack output.
With an output of 6.5 Watts into an 8-ohm load, this is an excellent amplifier for your computer set-up or reasonably sensitive speakers in your main hi-fi set-up.
The TU-H82 offers the clear sound of a solid-state amp and the soothing warm sound of a tube amp.
Features:
- Hybrid of vacuum tube input buffer and a D-class amplifier section
- AB-class headphone amp built-in
- DC-controlled electronic volume built-in the amplifier IC. Therefore the volume deflection between right and left channels at small sound volume is minimized.
- Headphone output
- Built-in USB-DAC for computer connection via mini-USB connector
- Interlocking the amp power ON/OFF with the PC USB power selectable
- Assembly kit for users to experience the fun of DIY
PCB is preassembled. No soldering is required. For assembly, users will need long-nose pliers and a screwdriver only. (A hex wrench is included.)
Technical Specification:
- Valve supplied - 12AU7
- Inputs - INPUT-1: 3.5 mm stereo mini jack (front), 170 mV, INPUT-2: RCA jack (rear), 470 mV, INPUT-3: USB mini-B connector (rear). INPUT-1 and INPUT-2 are mixed. The USB input is cut when INPUT-1 is connected.
- SPEAKER OUTPUT - 6-Ohm, 8.2W + 8.2W, 8-Ohm, 6.5W + 6.5W, Gold plated binding terminals (banana plug usable)
- HEADPHONE OUTPUT - 16-Ohm, 8mW + 8mW
- FREQUENCY RESPONSE - 20 to 25000Hz, -3dB, 6-ohm load
- RESIDUAL NOISE - 120uV (IEC, 6-Ohm load)
- USB DAC - 32 kHz / 44.1 kHz/ 48 kHz (16 bit), Windows XP or later, Mac OSX (No set-up required - plug and play)
- POWER VOLTAGE - 100Vac to 240Vac (can be used anywhere in the World). The amplifier is powered by 12Vdc PSU (supplied)
- POWER CONSUMPTION - No signal, 0.2A, full output 2A
- DIMENSIONS - W 88 mm x H 90 mm x D 117 mm (incl. projections), W 88 mm x H 88 mm x D 88 mm (chassis only)
- WEIGHT - Approx. 790g
- INSTRUCTIONS SUPPLIED IN English and Japanese
PRICE (1 off)
£225.00 +vat +p&p
See our instructional Youtube video below on how to construct the Elekit TU-H82 kit