LL2754: Lundahl Headphone Output Transformer

The LL2754 is a four-sectioned, dual coil, low-impedance C-core output transformer for headphone amplifier applications. LL2754 is available in PP and SE versions. The coil is wound using our standard high internal isolation technique with isolation foil between each copper layer. The core is an audio C-core of Lundahl`s production.

The LL2754 is available in 2 versions to suit the circuit topology. (The air-gap is adjusted during manufacture to suit)

• Push-Pull
• Single-ended

(N.B. The purpose of the airgap is to accept the DC current of the output valve without saturating the core, leaving enough headroom for the sound signal)

There are further 3 versions depending on what C-core material you require.

• Silicon-iron (STANDARD)
• Amorphous-iron (AM)
• Nanocrystalline (NC)

Turns ratio

• 1 + 1 : 1 + 1

Depending on how the winding sections of the transformers are wired together via the exposed solder pins, the constructor can adjust the following primary and secondary impedances.

Primary impedance: Secondary impedance turns ratio

• 1:1 for low-impedance headphones (32R to 50R)
• 1:2 for high-impedance headphones (300R to 600R)

Overall size including pins - 73mm x 61mm x 53mm

STARTING PRICE (1 off)
£89.26 +vat +p&p

Non-Stock Item - Please allow 4-6 weeks for dispatch

For more information, please refer to the datasheet below.